TV Mounts
Wall-Mount Setup Kit
In stock — ships same day before 3pm
- Secure checkout
- 30-day returns
- 2-year warranty
- Ships same day before 3pm
Why it's useful
Home Theater · Complete Setup Bundle
TV Mount + HDMI 2.1 Cable + Cable Raceway KitOne order gets your TV on the wall, connected at full 4K/8K speed, and wired clean with no cords hanging down the drywall. A full motion mount, a certified 48Gbps HDMI 2.1 cable, and a paintable raceway kit to hide the run — everything you need for a finished, showroom-clean install.
Why buy it as one kit
Three parts that are normally bought separately — and normally forgotten separately, too. This bundle solves the whole job in one checkout.
Full motion mount, 32–70"
Swivel, tilt, and pull the TV toward you — then push it flat when you're done.
- Fits 32–70" TVs up to 99 lbs — covers the vast majority of living-room and bedroom TVs.
- Max VESA 400×400mm — matches the mounting-hole pattern on most mid-to-large flat screens.
- 6 articulating arms — robot-welded steel construction for a rigid, non-flexing hold.
- Swivel left or right — angle the screen to your couch, kitchen island, or corner seating.
Pull it out, tilt down the glare
Extension and tilt working together for a genuinely adjustable viewing angle.
- Extends to 17.5" — pull the TV well off the wall for a closer view.
- Retracts to 3.4" — push it back flat against the wall when not in use.
- Tilts up 5° / down 15° — angle downward to cut glare from windows and overhead lights.
- ±3° post-install leveling — fine-tune the TV level after it's already on the wall.
48Gbps HDMI 2.1, certified
The cable that actually keeps up with a modern TV, console, or streaming box — not a cable that quietly caps your picture.
- 48Gbps bandwidth — HDMI 2.1 certified, well beyond the 18Gbps ceiling of standard HDMI 2.0 cables.
- Supports 4K@120Hz and 8K@60Hz — handles the highest resolutions and refresh rates current TVs and consoles output.
- Dolby Vision HDR — passes the full HDR signal for accurate color, contrast, and brightness.
- Double-layer shielding — protects signal integrity and the cable itself from everyday wear.
Built for gaming and streaming
6.6ft is the right length for most wall-mount setups, and it's rated for the devices people are actually plugging in.
- 6.6ft / 2M length — reaches comfortably from a wall-mounted TV down to a console or streaming box.
- PS5 & Xbox Series X ready — delivers the full bandwidth modern consoles need for high-res, high-refresh gaming.
- Works with Apple TV 4K & streaming devices — passes 4K HDR content without compression artifacts.
- Motion-blur reduction — high refresh-rate support keeps fast motion clean and sharp.
Hide the run, keep it paintable
290" of channel — enough to route a wall-mounted TV's cables from the mount down to an outlet or media console, out of sight.
- 290" total length — 20 pieces at 14.6" each, enough to plan a full vertical or horizontal run.
- Self-adhesive install — peel and stick to the wall, no drilling required for the channel itself.
- Paintable white PVC — paint it to match your wall color so it disappears completely.
- Snap-on cover — tuck cables inside and close the channel for a clean, finished line.
20 pieces, cut to plan your route
Pre-cut lengths mean less measuring and cutting, more sticking and done.
- 20× 14.6" sections — combine pieces to reach from the mount to your outlet or console.
- Corner & connector pieces included — route around corners without an awkward gap.
- Trim to fit — cut individual sections shorter for tight runs or odd wall layouts.
- Works with any cable — power cords, HDMI, Ethernet, or speaker wire all fit inside the channel.
What's in the bundle
Everything to go from bare wall to a finished, wired TV setup in one order.
- Mounting Dream full motion TV mount — bracket, drilling template, hardware in pre-labeled bags, Allen key.
- Belkin HDMI 2.1 cable, 6.6ft — one certified 48Gbps cable ready to connect your source device.
- YesBes 290" cable raceway kit — 20 channel pieces, connectors, and adhesive backing.
- Everything needed for a clean install — no separate trips or add-on purchases required.
In your space
The result: a wall-mounted TV that looks like it was professionally installed.
Specifications
01 · TV Wall Mount — Mounting Dream MD2380
02 · HDMI 2.1 Cable — Belkin Ultra HD
03 · Cable Raceway — YesBes 290" Kit
Install & use
Suggested order: mount the bracket into wood studs using the included template, hang the TV, connect the HDMI 2.1 cable to your source device, then route the cable through the raceway from the mount down to your outlet or console.
Studs, not drywall: the mount is rated for 16" wood studs; drywall alone will not support the rated weight. Use concrete anchors (available on request) for masonry walls.
Raceway finish: the channel is paintable — for the most seamless look, paint it to match your wall color after installation and before adding the cables.
One order. A finished wall.
Mount the TV, connect it at full 4K/8K speed, and hide every cable — all three pieces, one checkout.
Add bundle to cartFit & compatibility
Not sure if this fits your setup? Send us your TV model before ordering.
Specifications
Full specification sheet coming soon.
What's in the box
Product, mounting/connection hardware, and quick-start guide as applicable.
Setup and care
Wipe with a dry microfibre cloth. Detailed setup guidance for this product will be published here.
Shipping and returns
Ships same day on orders placed before 3pm. Free shipping over $50. Return any unused item within 30 days — see our shipping policy for full details.
Warranty
Covered by a 2-year warranty against manufacturing defects. See the warranty page for what's included.
Wall-Mount Setup Kit
$159.00
Pairs with
Complete your setup

TV Mounts
Universal Soundbar Mount Bracket — Up to 15 lb
Mount your soundbar directly above or below the television for a cleaner entertainment setup that moves with the screen. Flexible mounting Supports compatible soundbars weighing up to 15 lb (6.8 kg) Works with many fixed, tilting, and full-motion TV mounts Supports TV VESA patterns up to 600 × 400 mm Detachable extension plates provide multiple assembly positions Included Soundbar mounting bracket, extension plates, L-shaped mounting hardware, installation hardware, and instructions. Compatibility notice: Confirm the soundbar weight, mounting-hole type and spacing, TV VESA pattern, and available clearance before ordering. This bracket may not fit every soundbar or televisions over 83 inches.

TV Mounts
Full Motion TV Wall Mount for 32-70" TVs up to 99 lbs
Ref TVM-01 Full Motion Mount 32–70" TVs Up to 99 lbs Max VESA 400×400mm Fits 12" / 16" Wood Studs Home Theater · TV Mounting Full Motion TV Wall Mount — Swivel, Tilt & Extend, 32–70" Pull your TV off the wall, angle it to your seat, and push it back flat when you're done. Dual articulating arms in cold-rolled steel hold up to 99 lbs, with a 3-step install that fits 12" and 16" wood studs. Full Motion 01 Mounted in under 10 minutes A 3-step process with a drilling template, so there's no guesswork on the wall. Included template — mark stud holes accurately before you drill a single hole. 3-step process — wall plate, TV bracket, then hang — most owners finish in under 10 minutes. Multiple screw sizes included — hardware is pre-sorted so the right screw for your TV is easy to find. Level included — get the wall plate straight before you commit to the studs. Template, level & hardware Install 02 Swivel and tilt to your seat Full motion adjustment gets the screen pointed at you, not just at the wall. Swivel left or right — angle the TV toward your couch, kitchen island, or corner seating. Tilt down to cut glare — -12° down tilt reduces reflections from windows and overhead lights. +5° upward tilt — fine-tune the angle for mounts placed above eye level. Best for front-facing setups — tilt range suits standard living-room angles rather than steep, off-axis mounting. Swivel & tilt range Motion 03 Pull it out, push it flat Dual articulating arms extend for viewing and retract for a slim wall profile. Extends up to 13.89" — pull the TV off the wall for a closer, more direct view. Retracts to 2.59" — push it back flat against the wall when you're not adjusting the angle. Dual articulating arms — move independently for smooth extension without binding. Space-saving profile — sits close to the wall in the retracted position, out of the way of foot traffic. Extend 13.89" · retract 2.59" Arms 04 Cold-rolled steel, built to hold Rated for up to 99 lbs, with the load-bearing structure to back it up. Cold-rolled steel construction — a rigid frame that resists flex under a heavy screen. Holds up to 99 lbs — rated for large 65–70" TVs, mounted securely into the studs. Reinforced load-bearing arms — designed to keep the TV steady through repeated swivel and tilt use. Anchored to studs, not drywall — install into 12" or 16" wood studs, concrete, or brick for full-rated strength. Cold-rolled steel frame Build 05 Fits most 32–70" TVs Wide VESA range and stud spacing cover most flat-screen setups. VESA 75×75mm to 400×400mm — covers the mounting-hole pattern on most 32–70" TVs. Fits 12" and 16" wood studs — also mounts to concrete or brick with the included hardware. Confirm before you buy — check your TV's size, weight, and VESA pattern against the mount's range. Works with popular models — fits many mainstream 65" sets without modification. VESA 75×75 – 400×400mm Fit 06 What's in the box Everything needed to go from wall to mounted TV in one box. Wall mount bracket — dual articulating arms, pre-assembled where possible. Drilling template — mark your stud holes accurately before installing. Bubble level — confirm the wall plate is straight before you drill. Mounting hardware & multiple screw sizes — sorted for different TV back-panel thread sizes. Complete hardware kit Box 07 Specifications TV size range 32" – 70" Weight capacity Up to 99 lbs VESA compatibility 75×75mm – 400×400mm Material Cold-rolled steel Arm type Dual articulating (full motion) Extension 13.89" extended, 2.59" retracted Tilt -12° / +5° Swivel Left / right, adjustable to seat position Wall mounting 12" or 16" wood studs, concrete, or brick In the box Mount bracket, drilling template, bubble level, mounting hardware, multiple screw sizes 08 Install & use Before you drill: confirm your TV's weight, screen size, and VESA hole pattern against the specs above. Use the included template to mark stud locations, then check with a level before securing the wall plate. Stud-mounted only: this mount is rated for wood studs, concrete, or brick — not drywall alone. For concrete or brick, use appropriate anchors. Tilt range note: the -12°/+5° tilt suits standard front-facing viewing angles rather than steep overhead or off-axis mounting positions. Get your TV off the wall — and angled right. Swivel it, tilt it, push it flat when you're done. A sturdy steel mount that installs in one afternoon.

Bundles
Amazon Fire TV Stick HD + 12 Months of Fire Store Service
Your Fire TV Stick and a full year of Fire Store service Get an Amazon Fire TV Stick HD with 12 months of Fire Store service for one screen. Your service year starts when we activate it—not when you place your order. Amazon Fire TV Stick HD with Alexa Voice Remote 12 months of Fire Store service for one screen Guided app installation and activation after your device arrives No separate player-app fee How setup and activation work Receive your Fire TV Stick. The device is not preconfigured for Fire Store; an app needs to be installed. Contact Fire Store once it arrives. We will walk you through installing the app and activating your service. Contact Fire Store for setup help . Start your included year. Your 12 months of service begin at activation. Renew only when you choose After your included year, you can request another year of Fire Store service for $79. Renewal is not automatic. Contact Fire Store when you want to renew. What you need A compatible television with an HDMI port A Wi-Fi internet connection An Amazon account Frequently asked questions Does the stick arrive ready to stream Fire Store? No. An app must be installed. Contact us once your device arrives and we will guide you through installation and activation. When does my 12-month service start? At activation—not at purchase or dispatch. Is there a separate player-app fee? No. There is no separate player-app fee. Will I be charged automatically after a year? No. Renewal is by request and costs $79 for another year of Fire Store service. How many screens are included? This bundle includes service for one screen. Does this model support 4K? No. This is the Fire TV Stick HD model, with streaming output up to 1080p on compatible televisions. Are Netflix, Prime Video or Disney+ subscriptions included? No. Subscriptions to these third-party services are not included and may need to be purchased separately. Good to know Fire Store service is supplied separately from Amazon's hardware. Fire Store packages include standard premium content only; adult content is not included. App availability, remote app buttons and content availability may vary by region.
Works with HD televisions with HDMI, Amazon account
Save 20%Smart Home Security
Ring Battery Doorbell Plus – Satin Nickel
See visitors and packages from head to toe The Ring Battery Doorbell Plus gives you a wider, taller view of your front door with 1536p Head-to-Toe HD+ video. Check visitors, speak through the Ring app and monitor deliveries from almost anywhere—all with flexible battery-powered installation. More visibility at your front door Head-to-Toe HD+ video: A 150° horizontal and 150° vertical field of view helps capture visitors as well as packages placed near the ground. 1536p video: View clearer details in Live View and supported recordings. Color Night Vision: See more useful detail after dark when conditions allow. Two-Way Talk: See, hear and speak with visitors from the Ring app on a compatible phone or tablet. Motion detection and privacy zones: Customize monitored areas and reduce alerts from places you do not need to watch. Works with Alexa: Hear supported alerts on compatible Echo devices or view the front door on compatible Echo Show, Fire TV and Fire Tablet devices. Convenient power and installation Quick-Release Battery Pack: Remove the included rechargeable battery for easier charging without taking the entire doorbell off the wall. Flexible power options: Use the included battery, connect to compatible existing 8–24 VAC doorbell wiring for trickle charging, or use supported Ring power accessories sold separately. Simple setup: Connect through the Ring app and mount using the included installation tools and corner kit. Key specifications 1536p Head-to-Toe HD+ video 150° horizontal and 150° vertical field of view Color Night Vision Two-Way Talk and Live View 2.4 GHz Wi-Fi connectivity Approximate dimensions: 5.1 × 2.4 × 1.1 inches / 128 × 62 × 28 mm Operating range: -5°F to 122°F / -20.5°C to 50°C Satin Nickel faceplate What is included Ring Battery Doorbell Plus Rechargeable Quick-Release Battery Pack Satin Nickel faceplate Corner kit USB charging cable Installation tools User manual and security sticker Subscription disclosure Basic Live View, motion notifications and Two-Way Talk are available without purchasing a Ring Protect plan. Package and person alerts, recorded video history, video replays and certain advanced features require a compatible Ring Protect subscription sold separately. Feature availability may vary by region and plan. Ring, Alexa, Echo and Fire TV are trademarks of their respective owners.
Works with Ring app, 2.4 GHz Wi-Fi networks, Compatible Echo devices